How to set up a Mac mini with no monitor

The short answer

You still need a screen once. Apple’s setup expects a display on the HDMI port or a Thunderbolt port, plus a keyboard and a mouse. While they’re attached, turn on a way in, keep the Mac awake, set it to start after a power cut and decide what happens on a restart. Then unplug the screen and use the Mac from your laptop, through Screen Sharing, a remote desktop app or Mirrox.

Set it up once with a screen attached

Connect a screen to the HDMI port or a Thunderbolt port, plus a keyboard and mouse, then press the power button and follow Setup Assistant. That’s Apple’s Mac mini setup, and its guide to running a Mac mini as a server says to finish it first.

Give your account a strong password, which the server guide also asks for. You’ll be typing it from another room.

Keep the screen plugged in until the last step, so you can answer anything the Mac asks. Mirrox, for one, walks you through its permissions in a setup window at the Mac.

Turn on a way to reach it

Before the display goes, Apple asks for a way to manage the Mac from another computer: Remote Login, Screen Sharing, or the tools in your own server software. Set up two, so one can rescue the other. Apple’s two are in System Settings > General > Sharing.

  • Screen Sharing shows you the Mac’s screen. From a Windows PC, Apple says you need a third-party VNC viewer. How to use a Mac from a Windows laptop has the steps.
  • Remote Login lets another computer run commands on the Mac over SSH. It’s a good spare key if the screen ever won’t come up.
  • Mirrox goes on the Mac and on the laptop while the screen is still attached. The Mac shows a six-digit code, and you type it into the laptop once.

Keep it awake and coming back

Open System Settings > Energy and turn these on. Apple’s Energy settings page notes that some options aren’t on every Mac.

  • “Prevent automatic sleeping when the display is off.” Apple’s server guide warns that if a Mac mini goes to sleep, what it’s running may be interrupted.
  • “Wake for network access.” Apple describes it as waking the Mac to provide access to shared resources.
  • Start up after a power cut. Depending on your Mac, choose After power failure in the “Start up when power is connected” menu, or turn on “Start up automatically after a power failure.”

Apple also suggests turning on the firewall, in System Settings > Network. If something then can’t connect, check that the firewall lets it in.

Decide what happens when it restarts

Every Mac with Apple silicon encrypts its data on its own, and FileVault adds a second lock. Apple’s FileVault page for support staff says it locks the startup disk each time the Mac starts up or restarts, and you unlock it at the login window with your password. While FileVault is on, automatic login isn’t available.

That matters with no screen. Apple’s server guide mentions restarts after a power outage or a macOS update, and after one, a Mac with FileVault on waits at the login window until someone signs in.

So choose. Leave FileVault on and keep a screen and keyboard within reach for the rare restart, or turn it off and lose the layer that keeps someone holding the Mac from reading your data without your password. We’d leave it on.

A restart begun from Mirrox on the laptop comes back to the login window, because Mirrox uses an authenticated restart. To sign in there from the laptop, turn on Reach the Login Window from a Laptop, under Settings in Mirrox’s menu on the Mac. With it off, someone signs in at the Mac. A restart that happens any other way with FileVault on still needs someone at the Mac once. A locked Mac works too: you type your password at the lock screen from the laptop.

Unplug the screen and connect

Leave the Mac running and signed in, then unplug the screen, keyboard and mouse. Don’t shut it down first. With FileVault on, it would start up at the login window, and you’d want the screen there to sign in.

With Screen Sharing, connect with your VNC viewer. Apple’s tip for a sharper picture on a Mac with no display is High Performance mode, which needs a Mac with Apple silicon on the other end, not a Windows laptop.

With Mirrox, open it on the laptop and click Connect. It finds the Mac by itself, wakes it if it’s asleep and makes its own virtual display, with a sharp picture sized to the laptop’s screen. You don’t need an HDMI dummy plug, the little adapter that makes a Mac think a monitor is attached.

It needs a Mac with Apple Silicon, on macOS 15 or later, and a laptop with Windows 10 (version 2004 or later) or Windows 11, on x64 or ARM64. Away from home it needs Mirrox Anywhere, switched on in the Mirrox menu on the Mac. It’s free during the beta. The subscription price for later isn’t set yet. Mirrox is in beta now, and you can join it from the Mirrox page.

Before you unplug: a checklist

  • You can reach the Mac from the laptop in two ways, and you’ve tried both.
  • Energy settings: no sleeping with the display off, wake for network access, start up after a power failure.
  • You know the account password, and you’ve decided about FileVault.
  • Any app the Mac runs for you reopens on its own after a restart. Apple warns that some server apps otherwise need relaunching by hand.

Then the Mac can live anywhere with power and a network. If you talk to your apps, the microphone guide shows how to use the laptop’s mic, because a Mac mini has no microphone of its own.

Sources

Every claim about macOS or Windows on this page comes from Apple’s or Microsoft’s own documentation.

Mac and macOS are trademarks of Apple Inc. Windows is a trademark of Microsoft Corporation.