The Lab · live

Go ahead. Touch things.

Everything here runs in your browser, written from scratch for this site. No video, no mockups. Break it if you can.

SIM-01

PLC conveyor with live ladder logic

Press START and the scan cycle begins. Watch power flow through each rung. Click a box on the belt to jam it, then see the jam timer trip the fault latch.

Cell 01 · SortationPLC conveyor with live ladder

ReadyScan 50 ms · #1

Ladder · MainRoutine power flow

Belt speedVFD 30.0 Hz

Lane A: 0
Lane B: 0
Uptime: 00:00

Booting simulator…

SIM-02

CAN bus analyzer

Four nodes share one pair of wires at 500 kbit/s. Filter the trace, send your own frames from the Labs Tool node, or inject an error frame and watch the counters.

CAN 1 · 500 kbit/s · 11-bit IDsBus analyzer

Load0.0 %0 fr/s

ECU

TEC 0REC 0

Error active

ABS

TEC 0REC 0

Error active

BCM

TEC 0REC 0

Error active

Labs Tool

TEC 0REC 0

Error active

Paused. The bus model stops with the clock.

Time s	ID	Node	DLC	Data	Decoded
Press Start capture to begin.

Signal def@1+ is Intel byte order, unsigned

BO_ 192 ENGINE_RPM: 8 ECU
 SG_ EngineSpeed : 0|16@1+ (0.25,0) [0|16383.75] "rpm" ABS,BCM

0x0C00000000000000000

raw 0x0000 = 0 × 0.25 + 0 = 0.0 rpm

Gauge reads this signal straight from the frame.

Booting simulator…

SIM-03

Next on the bench

An AS-Interface network with slaves you can address, and a Profibus DP cycle you can slow down and watch.